Geometric Planter and Sconce An Introduction to Stained Glass

Design, Fabrication, and Text by Lidia K. Anderson

A 5" x 5" square, open-topped plant or candle holder set at an angle for a diamond-shaped appearance. Four 1‑1/4" x 5" strips of clear glue chip are used to construct the sides of the three-dimensional frame, and a 3‑1/2" square piece of Seafoam Green wispy glass is cut in half on the diagonal to fill the front and back bottom corners. The finished project is hung from a swivel hook. This project was constructed using the copper foil technique.

This article was originally published on page 6 in the Summer 2013 issue of Glass Patterns Quarterly.
Back issue magazineDigital Issue and CD available. To order issue with pattern included.



To view (and save) the whole article as a PDF, download for $1.95 below...

Read 3296 times