Design by Genea Crivello-Knable

Creating 3/4" square charms from designs that are sandwiched between pieces of glass and finished with beaded solder edges. Any image or design can be used as decoration for the small square inserts. Instructions for tinning the soldering iron are included along with suggestions for adding a decorative touch to the solder used to seal the edges of the squares. This project was constructed using the copper foil technique.

This article was originally published on page 12 in the Spring 2011 issue of Glass Patterns Quarterly.

To view (and save) the whole article as a PDF, download for $6.95 below...